Smith&
Your Floor Company

Smith's PolySeal Low Sheen

$97.63
/
Shipping calculated at checkout.
  • Low stock - 4 items left
  • Backordered, shipping soon

Smith’s Poly-SEAL is a single-component, fast-drying, waterborne polyurethane polymer fused with a cross-linking acrylic, which achieves a tenacious bond to approved substrates with very good resilience, longevity, UV stability, and wear.

RECOMMENDED USES:

  • Primer* for:
    Smith’s Poly WB
  • Seal Coat prior to high solids Polyurethanes for:
    Vinyl Chip Systems* (Residential Garage floors only)
    Terrazzo Sealer**
    Traditional Decorative Concrete Sealer (2 coats)
    Sealer for carved concrete, faux stone, etc. (Low Sheen)
  • Approved Substrates:
    Concrete, Stucco & Polymer Modified Overlays
    Pavers
    Concrete Stains & Dyes (i.e. Smith’s Color Floor & Smith’s Liquid Dye)
    Terrazzo (Cementitious & Epoxy)
APPLICATION

Apply via brush, roller, pump-up, HVLP, or airless spray (which may vary based on intended usage).

COVERAGE

Direct-to-concrete: 225-275 sq. ft.

Reference TDS for alternate substrates.

CLEAN UP

Clean up tools with dish detergent and water while wet. Freshly cured Smith's Poly-Seal may be removed by using solvents such as acetone, toluene, MEK, or xylene.

Smiths-Poly-SEAL-Primer-Sealer-PDS-121222.pdf

Smith Paints
https://smithpaints.com › uploads › 2024/11 › Smi...

Go to our FAQ page for frequently asked questions.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Smith’s Poly-SEAL is a single-component, fast-drying, waterborne polyurethane polymer fused with a cross-linking acrylic, which achieves a tenacious bond to approved substrates with very good resilience, longevity, UV stability, and wear.

RECOMMENDED USES:

  • Primer* for:
    Smith’s Poly WB
  • Seal Coat prior to high solids Polyurethanes for:
    Vinyl Chip Systems* (Residential Garage floors only)
    Terrazzo Sealer**
    Traditional Decorative Concrete Sealer (2 coats)
    Sealer for carved concrete, faux stone, etc. (Low Sheen)
  • Approved Substrates:
    Concrete, Stucco & Polymer Modified Overlays
    Pavers
    Concrete Stains & Dyes (i.e. Smith’s Color Floor & Smith’s Liquid Dye)
    Terrazzo (Cementitious & Epoxy)
APPLICATION

Apply via brush, roller, pump-up, HVLP, or airless spray (which may vary based on intended usage).

COVERAGE

Direct-to-concrete: 225-275 sq. ft.

Reference TDS for alternate substrates.

CLEAN UP

Clean up tools with dish detergent and water while wet. Freshly cured Smith's Poly-Seal may be removed by using solvents such as acetone, toluene, MEK, or xylene.

Smiths-Poly-SEAL-Primer-Sealer-PDS-121222.pdf

Smith Paints
https://smithpaints.com › uploads › 2024/11 › Smi...

You may also like

Recently viewed