Concrete Primer

Coval Concrete Primer is a fast-drying, acetone-based acrylic sealer designed to fill in the concrete pores prior to applying Coval Concrete. When Coval Concrete is applied, it will incorporate the acrylic of the primer into the coating and bond to the concrete surface as one. Using Coval Concrete Primer will also reduce the amount of Coval Concrete used because material is not lost by seeping into the surface pores. Coval Concrete Primer is also used for masonry surfaces to seal the interior pores before sealing with Coval Concrete.

Do not over-apply. Coval Concrete Primer is an acrylic. When Coval Concrete is applied it will re-emulsify this acrylic into the coating. If you overapply this primer, it will create a barrier that can prevent Coval Concrete from bonding with the surface and will peel off. Stop applying once the primer is not being absorbed by the concrete. 

Coval Concrete Primer should NOT be used on non-porous surfaces.
Do not use over Coval coatings or any other brand of coating. It is only to be applied directly onto concrete or masonry. If removal is needed, use an acetone-soaked rag or microfiber cloth.

RECOMMENDED USES
A. Concrete floors broom finish
B. Concrete Block
C. Stamped Overlays
D. Precast concrete & vertical masonry

Go to our FAQ page for frequently asked questions.