High Gloss Wet Look Lacquer VOC Compliant

High Gloss Wet Look Lacquer VOC Compliant

Regular price$80.00
/
Shipping calculated at checkout.

  • Low stock - 7 items left
  • Backordered, shipping soon

High Gloss Wet Look Lacquer

Our solvent-based, high gloss, crystal clear, deep penetrating sealer is designed for decorative concrete, paving stone and natural stone surfaces, to enhance and beautify their natural color.

Product Information

GST International’s High Gloss Wet Look Lacquer is a solvent-based, high gloss, crystal clear, deep penetrating barrier coating for decorative concrete, stone, natural and manufactured hardscape surfaces.  High Gloss Wet Look Lacquer provides a ‘water-wet’ appearance which enhances and beautifies the natural color of the applied masonry surface.  Non yellowing High Gloss Wet Look Lacquer seals against food stains, gasoline, grease, oils, water and acid. Its deep bonding formula resists peeling, chipping, cracking and UV degradation.  

Made from the latest developments in solvent-based acrylic chemistry, High Gloss Wet Look Lacquer delivers excellent resistance to the formation of efflorescence.  When used on newly placed concrete, the sealer will help protect against spalling, dusting, freeze-thaw damage and alkali degradation. High Gloss Wet Look Lacquer remains hard even under extreme sunlight and delivers superior wear resistance. Its VOC compliant formula works great indoors and outdoors to provide a breathable barrier that allows moisture to escape from the coated surfaces.  Also, it is effective as a joint sand stabilizer for interlocking pavers.

FEATURES:

  • Easily applied, fast drying, long lasting
  • Interior and exterior use
  • Inhibits efflorescence
  • Gas, oil and grease resistant
  • Water repellent
  • Non-yellowing and UV resistant
  • 85-90% color densification

 LIMITATIONS:

Not recommended for pre-sealed surfaces or non-porous surfaces such as ceramic tile, marble, granite, porcelain and terrazzo. Do not use where hydrostatic pressure is possible.

USE ON:

  • Standard concrete  
  • Colored and stamped concrete
  • Exposed aggregate concrete
  • Natural stone
  • Manufactured stone
  • Interlocking pavers
  • Porous brick
  • Mexican tile
  • Wet Cast concrete products

Meets or exceeds Federal EPA standards for VOC compliance.
Meets or exceeds South Coast Air Quality Management District and the Bay Area Air Quality Management District, for VOC compliance of less than 100g/l  required by the State of California.

      *The 5 Gallon Pail cannot be shipped. It can only be purchased for local delivery.

      Go to our FAQ page for frequently asked questions.

      This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


      High Gloss Wet Look Lacquer

      Our solvent-based, high gloss, crystal clear, deep penetrating sealer is designed for decorative concrete, paving stone and natural stone surfaces, to enhance and beautify their natural color.

      Product Information

      GST International’s High Gloss Wet Look Lacquer is a solvent-based, high gloss, crystal clear, deep penetrating barrier coating for decorative concrete, stone, natural and manufactured hardscape surfaces.  High Gloss Wet Look Lacquer provides a ‘water-wet’ appearance which enhances and beautifies the natural color of the applied masonry surface.  Non yellowing High Gloss Wet Look Lacquer seals against food stains, gasoline, grease, oils, water and acid. Its deep bonding formula resists peeling, chipping, cracking and UV degradation.  

      Made from the latest developments in solvent-based acrylic chemistry, High Gloss Wet Look Lacquer delivers excellent resistance to the formation of efflorescence.  When used on newly placed concrete, the sealer will help protect against spalling, dusting, freeze-thaw damage and alkali degradation. High Gloss Wet Look Lacquer remains hard even under extreme sunlight and delivers superior wear resistance. Its VOC compliant formula works great indoors and outdoors to provide a breathable barrier that allows moisture to escape from the coated surfaces.  Also, it is effective as a joint sand stabilizer for interlocking pavers.

      FEATURES:

      • Easily applied, fast drying, long lasting
      • Interior and exterior use
      • Inhibits efflorescence
      • Gas, oil and grease resistant
      • Water repellent
      • Non-yellowing and UV resistant
      • 85-90% color densification

       LIMITATIONS:

      Not recommended for pre-sealed surfaces or non-porous surfaces such as ceramic tile, marble, granite, porcelain and terrazzo. Do not use where hydrostatic pressure is possible.

      USE ON:

      • Standard concrete  
      • Colored and stamped concrete
      • Exposed aggregate concrete
      • Natural stone
      • Manufactured stone
      • Interlocking pavers
      • Porous brick
      • Mexican tile
      • Wet Cast concrete products

      Meets or exceeds Federal EPA standards for VOC compliance.
      Meets or exceeds South Coast Air Quality Management District and the Bay Area Air Quality Management District, for VOC compliance of less than 100g/l  required by the State of California.

          *The 5 Gallon Pail cannot be shipped. It can only be purchased for local delivery.

          You may also like


          Recently viewed